MPL4258

Board with 32 optical isolated outputs

With its 32 industrial output and low power consumption, the MPL4258 is the ideal solution for those situations requiring the maximum number of opto isolated industrial outputs on a small surface area with low running costs, and economic price.
The MPL4258 can drive currents up to 120mA at 12V, 24V or 48V on its 32 opto isolated output lines and can be configured with either "sink" or "source" output stages.
The output stages are connected via two 26 pin connectors, 16 lines at each connector and the module is fully compatible with the G-64/96 bus.

Technical Features

Full G-64/96 bus interface
32 industrial outputs
Four 8 channel ports with read-back capability
Output voltage 12, 24 or 48 volt
Sink or source output stage separately selectable
Output current 120mA / output
Connection via two 26 pin flat cable connectors
Access LED
1500V DC opto coupler isolation voltage
Synchronous access mode
Requires 4 byte of VPA space
Power requirements: single +5V, @20mA
Temperature range 0° to 70 °C ( +32° to 132 °F)

Description

The MPL4258 is a low cost fully optical isolated output board with 32 source or sink drivers. The 32 outputs on J2 and J3 respectively have a maximum output current in excess of 120mA each. The output driver will withstand voltages up to 50V DC. The 32 outputs are divided into 4 groups with eight outputs each. Every output port has a read back capability.

The two versions of the MPL4258 differ only in the output stage. They are preconfigured by the factory and can be ordered with the following numbers: MPL4258-1 32 sink output stages, MPL4258-2 32 source output stages.

Further Documentation

Manuals, Data Sheets, and Press Releases can be found in the MPL Documentation area of this homepage.