| IDE2CF |
 |
 |
 |
| Compact Flash Adapter |
![[IDE2CF]](images/Peripherals/IDE2CF-combo.jpg)
The IDE2CF adapters are cost effective and easy to use adapters for
connecting CompactFlash cards to the standard IDE port of your system. The
adapters are build up in PC/104 form factor for an easy mechanical fastening.
An optional stack through PC/104 connector for installing additional PC/104
cards is available. The adapters are electrically linked to the IDE port via
standard IDE cable either, over the 44- pin 2 mm pitch or, the 40-pin 2.54 mm
pitch header. The IDE2CF adapter has 1 CompactFlash slot, fitting type I and
II cards. So on the adapter any CompactFlash Storage Card can be used.
With the IDE2CF adapter the storage cards are used like IDE hard disks,
they are not hot plug capable. If you require hot plugging support, use the
PCCARD Module of MPL AG.
IDE2CF Specialities
- Bootable storage interfaces
- Master/Slave selection
- 44 or 40-pin IDE interface
- PC/104 form factor
- CF-Cards type I & II
Technical Features
| Compact Flash Interface |
| Card Types supported |
CompactFlash Storage Cards type I and II only |
Use the PCCARD Module for other card types! |
| Interface Voltage |
5V only |
|
| Physical/Power |
| Power |
+5VDC +/-5% |
via 44-pin IDE connector or through PC/104 connector |
| Temperature Range |
-20°C up to 70°C |
|
| Humidity |
5% - 95% non condensing |
|
| Operating Systems |
| All Operating Systems that support IDE media will work with
the IDE2CF. However, please note that Hot-Plug support for standard IDE media
is not supported by most operating systems. |
IDE2CF Versions
| IDE2CF-[Slots][PC/104
Connector][IDE Connector][Slot Style] |
| Slots: |
| 1 |
Single CompactFlash Slot |
| PC/104 Connector: |
| A |
PC/104 stack-through connector assembled |
| N |
No PC/104 stack-through connector |
| IDE Connector: |
| 40 |
40-pin, 2.54 mm pitch IDE connector assembled |
| 44 |
44-pin, 2 mm pitch IDE connector assembled |
| Slot Style: |
| |
slot overlapping module edge for external accessibility |
| i |
slot lockable on PC/104 module, no access from outside |
|
Example: IDE2CF-1N40
- Single Slot
- No PC/104 connector
- 40-pin IDE connector
- slot style external accessibility
|
|
For further customer specific versions, please contact MPL AG.
Extended Temperature Option
| Reference |
Description |
| XTEST-1 |
Extended temperature test, -40°C up to +85°C |
Für den Einsatz in rauher Einsatzumgebung kann die IDE2CF Karte für den erweiterten Temperaturbereich
von -40/+85°C bestellt werden. Jeder ausgelieferte IDE2CF muß verschiedene Tests im Klimaschrank
absolvieren, um mögliche Materialfehler über das gesamte Temperaturprofil aufzuzeigen.
Copyright ©
1997-2010 MPL AG Elektronikunternehmen, a member of the HT Holding AG
