Industrial Firewall / Router with Gigabit Switch

Industrial Firewall / Router with Gigabit Switch (GUARD-FS)

GUARD-FS

Mit dem GUARD-FS hat MPL mehrere Systeme in ein Gehäuse integriert, eine Firewall, ein VPN-Gateway, einen Router sowie einen Ethernet Switch mit Ihrer Wahl von Kupfer- und / oder Fiber Ports.
Heute wird alles automatisiert. Deshalb wird die Sicherheit in dieser automatisierten Welt immer wichtiger. Die wichtigsten Unterschiede bei den industriellen Anwendungen sind, dass sie aufgrund des Life Cycle der Investitionen eine langfristige Verfügbarkeit erfordern.

GUARD-FS Highlights

Das System kann von -20°C bis + 60°C (optional -40°C bis + 85°C) betrieben werden, ohne dass ein Lüfter oder Gehäuseöffnungen erforderlich sind. Die Verfügbarkeit von Copper sowie SFP Ports für verschiedene Glasfaser-Lösungen, macht das Produkt universell. Diese Vielseitigkeit wird durch die Verfügbarkeit eines Software Development Kit, den leistungsstarke 1,2 GHz ARM Prozessor und die 512 MByte Flash, unterstützt.

Diese Eigenschaften machen den GUARD-FS zu einer idealen Lösung für Industrie-, Transport- und Militäranwendungen, bei denen Sicherheit, Qualität, Zuverlässigkeit, geringer Stromverbrauch und Langzeitverfügbarkeit entscheidend sind.


[GUARD-FS

Firewall/Router used in sensitive environment

[GUARD-FS]

GUARD-FS used as frontend in maintenance monitoring system

Technical Features

Board Key Data
Processor RISC SoC 1.2GHz Low Power CPU
Memory / Firmware 512MByte DDR2 / 512MByte NAND Flash Soldered OnBoard
Interfaces
Firewall ports 2 x RJ45 ports, auto negotiation, auto MDI MDIX
or 2 x SFP Slot
Either 10BaseT /100BaseTX /1000BaseTX or
100Base-FX or 1000Base-LX SFP Modules
Switch ports *4 x RJ45 copper ports or
*2 x RJ45 and 2 x SFP
* configuration depends on version ordered
Either 10BaseT /100BaseTX /1000BaseTX or
100Base-FX or 1000Base-LX SFP Modules
 
Mini PCI-Express For WLAN, GPRS, UMTS, etc. Minicard Slot
Physical / Power
Chassis Compact rugged chromated Aluminum with stainless steel plates no ventilation holes
Size & Weight 62.1 x 162.1 x 118mm 0.94kg / 2lb including housing
Power 8 - 36VDC Power consumption < 9 W, reverse polarity protection
Environment
Temperature Range -20°C to +60°C optionally -40°C to +85°C No fan, no openings, values at full CPU load
Humidity 5% - 95% non-condensing Optional coating available
Standard Compliance
The GUARD-FS is designed to meet or exceed the most common standards. Particular references are:
EMC EN 55022, EN 55024, EN 61000, MIL-STD-461E
Shock & Vibration EN 60068
Environmental & Safety EN 50155, MIL-STD-810-F, EN 60601, EN 60950

Software
The GUARD-FS comes preinstalled with an adapted version of OpenWRT ( www.openwrt.org). This Linux based embedded distribution provides all functionality required for operation as IPV4 and/or IPV6 firewall and router. The vast amount of additional packages available in conjunction with MPL support allows you to create a solution for every routing or firewall project.
Most of the configuration of the firmware installed can be done using a web based interface. For more specialized requirements, a console based configuration utility is available. All configuration is stored on the device in a human friendly text format and can be modified using a text editor, too.

Functions and protocols:
  • TCP/IP V4 and V6, IPsec
  • QoS (Quality Of Service) capable
  • SIIT(IPV4-over-IPV6 translation)
  • Miredo/Teredo (IPV6 over IPV4 tunneling)
  • PPP (Point-to-Point Protocol)
  • Network address translation
  • Multi WAN Setup (failover and load balancing)
  • DHCP Server for IPV4 and IPV6
  • DNS server/forwarder
  • Support for dynamic DNS providers
  • OpenVPN support
  • OpenConnect client support
  • Firewall based on linux iptables
  • SSH and telnet device access
  • Snort (lightweight intrusion detection)
  • Routing daemons (OSPF, RIP, BGP, ...)
Further functionality can be installed using a package repository that contains more then 2000 precompiled applications ready to install. A software development kit (SDK), allowing to implement customer specific applications, is available as well.
 

GUARD Versions

Reference Descriptions
GUARD-F1 Rugged Industrial Firewall/Router with 3 Gigabit Ethernet ports ( 1 x RJ45 and 2 x RJ45/SFP slots), preinstalled OpenWRT embedded Linux distribution. (Housing has to be added separately)
GUARD-F12 Rugged Industrial Firewall/Router with 3 Fast Ethernet ports on M12 connectors, pre-installed OpenWRT embedded Linux distribution. For Railways with EN50155 Class Tx Certificate.
GUARD-FS1 Rugged Industrial Firewall/Router with 2 Gigabit Ethernet ports (2x RJ45 or 2x SFP) and a 4 port switch (MAGBES-13) with 3x RJ45 and 1x SFP port, preinstalled OpenWRT embedded Linux. (Housing has to be added separately)
GUARD-FS2 Rugged Industrial Firewall/Router with 2 Gigabit Ethernet ports (2x RJ45 or 2x SFP) and a 4 port Switch (MAGBES-12) with 2x RJ45 and 2x SFP ports, preinstalled OpenWRT embedded Linux. (Housing has to be added separately)
GUARD-FS3 Rugged Industrial Firewall/Router with 2 Gigabit Ethernet ports (2x RJ45 or 2x SFP) and a 4 port switch (MAGBES-11) with 4x RJ45, preinstalled OpenWRT embedded Linux. (Housing has to be added separately)
GUARD-Cx GUARD Solution assembled & mounted according the customer needs & requirements (e.g. with special housing, depopulated parts, installing a customers application, ....)
GUARD Housing
GUARD 62-1 Ultra Compact Housing with internally chromated Aluminum and stainless steel plates.
Housing size: 62.1 x 162.1 x 118mm (W x D x H), DIN-Rail, external Aluminum is RAL7016 powder coated.
GUARD 62-2 Ultra Compact Housing with internally chromated Aluminum and stainless steel plates.
Housing size: 62.1 x 162.1 x 118mm (W x D x H); Wall mounting plate for 4 screws

Accessories

SFP (optical transceiver) in stock
Optional: MPL offers following SFP modules (others on request)
SFP-1X 1Gb SFP 850nm optical transceiver, 1000BASE-SX, multi mode, up to 500m, with standard LC connector, case temp. -40 to +85°C
SFP-2X 1Gb SFP 1310nm optical transceiver, 1000BASE-LX, single mode, up to 10km, with standard LC connector, case temp. -40 to +85°C
SFP-3X 100Mb SFP 1310nm optical transceiver, 100BASE-FX, multi mode, up to 2km, with standard LC connector, case temp. -40 to +85°C
or any other standard SFP in accordance to MSA & Ethernet compatible
 
 Copyright © 1997-2018 MPL AG Elektronikunternehmen, a member of the HT Holding AG  |  Privacy Statement
MPL on LinkedIn    MPL on twitter    MPL on Google+